# English Forum

**URL:** https://community.openems.io/c/english/8.md?page=2

[Latest](https://community.openems.io/latest.md) · [Categories](https://community.openems.io/categories.md)

**Page:** 3

---

## [OpenEMS daily energy (kWh) handling](https://community.openems.io/t/openems-daily-energy-kwh-handling/10695)

<div class="topic-metadata">

**Author:** [@kmaruani](https://community.openems.io/u/kmaruani)\
**Replies:** 0\
**Last updated:** [January 5, 2026, 2:17pm UTC](https://community.openems.io/t/openems-daily-energy-kwh-handling/10695 "2026-01-05T14:17:05Z")

</div>

Hi OpenEMS community, I’m integrating an energy meter into OpenEMS Edge and I need precise daily (and weekly/monthly/yearly) energy consumption/production in my case, and I’m confused about where exactly OpenEMS compute…

---

## [Optimal Hardware Requirements for openEMS](https://community.openems.io/t/optimal-hardware-requirements-for-openems/2495)

<div class="topic-metadata">

**Author:** [@nada](https://community.openems.io/u/nada)\
**Replies:** 18\
**Last updated:** [January 5, 2026, 9:42am UTC](https://community.openems.io/t/optimal-hardware-requirements-for-openems/2495 "2026-01-05T09:42:08Z")

</div>

Hallo OpenEMS-gemeenschap, Ik hoop dat dit bericht je in goede gezondheid bereikt. Ik ben in de planningsfase van de implementatie van een OpenEMS-project gericht op het beheren en optimaliseren van een residentieel zon…

---

## [Connecting Kostal Piko PV inverter to OpenEMS](https://community.openems.io/t/connecting-kostal-piko-pv-inverter-to-openems/10231)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 55\
**Last updated:** [December 26, 2025, 10:29am UTC](https://community.openems.io/t/connecting-kostal-piko-pv-inverter-to-openems/10231 "2025-12-26T10:29:07Z")

</div>

We’re running some old Kostal Piko 4.2, 5.5, 8.3, 10.1 PV inverters, which I like to connect to OpenEMS. Using the PV-Inverter Kostal component I receive a Modbus Communication failed warning message and no values are s…

---

## [Wrong \_sum value after adding PV cluster](https://community.openems.io/t/wrong-sum-value-after-adding-pv-cluster/1831)

<div class="topic-metadata">

**Author:** [@zhang.jin](https://community.openems.io/u/zhang.jin)\
**Replies:** 7\
**Last updated:** [December 23, 2025, 3:37pm UTC](https://community.openems.io/t/wrong-sum-value-after-adding-pv-cluster/1831 "2025-12-23T15:37:40Z")

</div>

Hi. I have two pv inverters pv0 and pv1. I have also created a PV cluster named pvInverter-cluster0 to manage pv0 and pv1. It works fine but I notice total PV output, as shown by “\_sum\[xx, Production: xx\]” now doubles. …

---

## [Question about component structure in edge](https://community.openems.io/t/question-about-component-structure-in-edge/10673)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 1\
**Last updated:** [December 21, 2025, 9:22pm UTC](https://community.openems.io/t/question-about-component-structure-in-edge/10673 "2025-12-21T21:22:38Z")

</div>

Using the UI to add or configure components within the edge, I’m sometimes confused by the structure/clustering of the components into the different categories. Let’s have a look at following example: If I search for cha…

---

## [Recommendation for a high-voltage contactor](https://community.openems.io/t/recommendation-for-a-high-voltage-contactor/10670)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 12\
**Last updated:** [December 20, 2025, 2:46pm UTC](https://community.openems.io/t/recommendation-for-a-high-voltage-contactor/10670 "2025-12-20T14:46:04Z")

</div>

We would like to simply control some consumers for peak shaving by turning them on and off. Thus we are looking for a high-voltage contactor (Deutsch: Starkstrom-Schütz) that is already well supported by OpenEMS. Can som…

---

## [Please advise for hardware?](https://community.openems.io/t/please-advise-for-hardware/10616)

<div class="topic-metadata">

**Author:** [@PSP\_OOD](https://community.openems.io/u/PSP_OOD)\
**Replies:** 3\
**Last updated:** [December 15, 2025, 5:34pm UTC](https://community.openems.io/t/please-advise-for-hardware/10616 "2025-12-15T17:34:01Z")

</div>

Hello community, I’m Anton Angelov from Bulgaria and I have played with openems for last days. I have made some drivers for Huawei devices and planing to add more. Also I want if everything goes well with test projects …

---

## [Implementation DEYE Inverter - Approach](https://community.openems.io/t/implementation-deye-inverter-approach/2541)

<div class="topic-metadata">

**Author:** [@Rayleigh3105](https://community.openems.io/u/Rayleigh3105)\
**Replies:** 27\
**Last updated:** [November 28, 2025, 1:42pm UTC](https://community.openems.io/t/implementation-deye-inverter-approach/2541 "2025-11-28T13:42:29Z")

</div>

Hello, I´m trying to implement the DEYE Inverter (DEYE SUN-12K-SG04LP3-EU). Thanks to @acabrera I got a brief overview how to implement the hybrid battery inverter. I still try to figure out how to implement the whole s…

---

## [ModbusTaks with multiple unitIDs](https://community.openems.io/t/modbustaks-with-multiple-unitids/2475)

<div class="topic-metadata">

**Author:** [@klinki](https://community.openems.io/u/klinki)\
**Replies:** 8\
**Last updated:** [November 28, 2025, 7:54am UTC](https://community.openems.io/t/modbustaks-with-multiple-unitids/2475 "2025-11-28T07:54:35Z")

</div>

Hi, I am trying to implement an ESS for victron. The multiplus 2 offers ESS features out of the box so there is no need to add batteries. But to gather all relevant information I have to set up different Modbus Tasks w…

---

## [Improving the getting started documentation](https://community.openems.io/t/improving-the-getting-started-documentation/10607)

<div class="topic-metadata">

**Author:** [@Simon](https://community.openems.io/u/Simon)\
**Replies:** 0\
**Last updated:** [November 13, 2025, 10:27pm UTC](https://community.openems.io/t/improving-the-getting-started-documentation/10607 "2025-11-13T22:27:04Z")

</div>

Hi there, Simon here from Smart Energy Solutions coming to you with my very first post. :slight\_smile: You may remember me from last year’s OpenEMS Conference. (Unfortunately I missed it this year since I do not appear …

---

## [Problems with modbus RTU serial](https://community.openems.io/t/problems-with-modbus-rtu-serial/10483)

<div class="topic-metadata">

**Author:** [@pixelmanh](https://community.openems.io/u/pixelmanh)\
**Replies:** 1\
**Last updated:** [November 13, 2025, 4:34am UTC](https://community.openems.io/t/problems-with-modbus-rtu-serial/10483 "2025-11-13T04:34:07Z")

</div>

Hi, I have a problem with connecting to device via usb - rs485 converter . I turn on bridge modbus/rtu serial and 1 meter then it shows error as below: 2025-09-08T14:16:46,463 \[modbus0 \] ERROR \[e.modbus.api.task.Abstra…

---

## [OpenEMS- UI- Modbus TCP ](https://community.openems.io/t/openems-ui-modbus-tcp/10588)

<div class="topic-metadata">

**Author:** [@CongDanhES](https://community.openems.io/u/CongDanhES)\
**Replies:** 2\
**Last updated:** [November 6, 2025, 1:49am UTC](https://community.openems.io/t/openems-ui-modbus-tcp/10588 "2025-11-06T01:49:09Z")

</div>

I’m currently running OpenEMS Edge + UI via Docker, and everything is working fine. I want to write to specific Modbus registers (e.g., ess0/SetActivePowerEquals) directly from: Apache Felix Web Console → Configur…

---

## [ESS: Victron Multiplus / Quattro](https://community.openems.io/t/ess-victron-multiplus-quattro/2441)

<div class="topic-metadata">

**Author:** [@klinki](https://community.openems.io/u/klinki)\
**Replies:** 18\
**Last updated:** [November 5, 2025, 8:32am UTC](https://community.openems.io/t/ess-victron-multiplus-quattro/2441 "2025-11-05T08:32:29Z")

</div>

Hi, As we are planning the installation of a victron ESS composed of 3 Quattro 15kVA inverters and a set of pytes batteries (approximately 45kWh). Has anyone started implementing Victron components? Regards, klinki

---

## [Help with Connecting OpenEMS to GoodWe Hybrid Inverter ETplus+](https://community.openems.io/t/help-with-connecting-openems-to-goodwe-hybrid-inverter-etplus/9994)

<div class="topic-metadata">

**Author:** [@nada](https://community.openems.io/u/nada)\
**Replies:** 3\
**Last updated:** [November 3, 2025, 2:10am UTC](https://community.openems.io/t/help-with-connecting-openems-to-goodwe-hybrid-inverter-etplus/9994 "2025-11-03T02:10:59Z")

</div>

Hi EMS Community, I have successfully connected the OpenEMS to the GoodWe Hybrid Inverter ETplus+, specifically linking the Battery Inverter and Bridge RTU components. However, I am facing an issue where the display on …

---

## [HowTo connect preBuuild UI with local Edge?](https://community.openems.io/t/howto-connect-prebuuild-ui-with-local-edge/10553)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 9\
**Last updated:** [October 28, 2025, 11:13am UTC](https://community.openems.io/t/howto-connect-prebuuild-ui-with-local-edge/10553 "2025-10-28T11:13:13Z")

</div>

For debugging/reviewing I’m running a local edge out of Eclipse. Controller API Websocket is enabled and configured with port 8085: nmap shows me that port 8085 is open. I downloaded the pre-build UI from October an…

---

## [OpenEMS a good fit?](https://community.openems.io/t/openems-a-good-fit/10563)

<div class="topic-metadata">

**Author:** [@relias](https://community.openems.io/u/relias)\
**Replies:** 0\
**Last updated:** [October 24, 2025, 4:56pm UTC](https://community.openems.io/t/openems-a-good-fit/10563 "2025-10-24T16:56:01Z")

</div>

Hi all This could get a bit lengthy… I’m part of an energy cooperative with a growing number of distributed solar systems. My goal is to have a self-hosted monitoring solution where the inverters only access to the in…

---

## [docker: UI not reachable](https://community.openems.io/t/docker-ui-not-reachable/10559)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 2\
**Last updated:** [October 22, 2025, 4:33pm UTC](https://community.openems.io/t/docker-ui-not-reachable/10559 "2025-10-22T16:33:56Z")

</div>

So I tried to do a fresh restart using following docker-compose.yml which has worked for me before: services: openems-edge: #image: openems/edge:latest image: openems/edge:develop container\_name: openems\_e…

---

## [Clarification on starting Edge using Docker](https://community.openems.io/t/clarification-on-starting-edge-using-docker/5861)

<div class="topic-metadata">

**Author:** [@MateiDumitrescu](https://community.openems.io/u/MateiDumitrescu)\
**Replies:** 1\
**Last updated:** [October 21, 2025, 7:37pm UTC](https://community.openems.io/t/clarification-on-starting-edge-using-docker/5861 "2025-10-21T19:37:52Z")

</div>

Hello, I am having issues running the Edge docker container. With the image from https://hub.docker.com/r/openems/edge, I ran docker run --name openems\_edge -p 8080:8080 -d openems/edge The container logs show 11:05:…

---

## [limit of pv inverters?](https://community.openems.io/t/limit-of-pv-inverters/10558)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 6\
**Last updated:** [October 21, 2025, 8:23am UTC](https://community.openems.io/t/limit-of-pv-inverters/10558 "2025-10-21T08:23:05Z")

</div>

I’m adding all pv inverters in our system. Until the 10th inverter, everything looks good: But once I add the 11st pv inverter, the system somehow fails and no values are shown anymore in the UI: The system log i…

---

## [How to create UML class diagramm out of Java code](https://community.openems.io/t/how-to-create-uml-class-diagramm-out-of-java-code/10557)

<div class="topic-metadata">

**Author:** [@sjjh](https://community.openems.io/u/sjjh)\
**Replies:** 0\
**Last updated:** [October 18, 2025, 3:39pm UTC](https://community.openems.io/t/how-to-create-uml-class-diagramm-out-of-java-code/10557 "2025-10-18T15:39:28Z")

</div>

To get a better understanding of the existing devices and their capabilities within OpenEMS, I’d love to have a UML class diagram. My naive hypothesis is, that there must be a software I can simply point to the OpenEMS s…

---

## [Issue using RevPi DIO Board with openems](https://community.openems.io/t/issue-using-revpi-dio-board-with-openems/10534)

<div class="topic-metadata">

**Author:** [@p.OpenEms](https://community.openems.io/u/p.OpenEms)\
**Replies:** 2\
**Last updated:** [October 9, 2025, 4:41am UTC](https://community.openems.io/t/issue-using-revpi-dio-board-with-openems/10534 "2025-10-09T04:41:10Z")

</div>

Hi everyone, I’m running OpenEMS on a Revolution Pi and I can’t get IO.RevolutionPi.DigitalIO to work as intended. I have recompiled the librevpi-dio-java.jar inside to make it fit my 64 bit OS. The component now activ…

---

## [Deploy Edge and UI in Docker](https://community.openems.io/t/deploy-edge-and-ui-in-docker/10512)

<div class="topic-metadata">

**Author:** [@rene](https://community.openems.io/u/rene)\
**Replies:** 1\
**Last updated:** [September 24, 2025, 10:15pm UTC](https://community.openems.io/t/deploy-edge-and-ui-in-docker/10512 "2025-09-24T22:15:06Z")

</div>

Hi,I am new to OpenEMS and wanted to deploy the edge and the ui both as docker containers on my raspberry pi. I used the following docker compose file: services: openems-edge: image: openems/edge:latest contai…

---

## [Controller FixActivePower spiralling out of control](https://community.openems.io/t/controller-fixactivepower-spiralling-out-of-control/10509)

<div class="topic-metadata">

**Author:** [@thomas](https://community.openems.io/u/thomas)\
**Replies:** 3\
**Last updated:** [September 24, 2025, 7:27am UTC](https://community.openems.io/t/controller-fixactivepower-spiralling-out-of-control/10509 "2025-09-24T07:27:59Z")

</div>

Hello, I have been encountering a strange issue when testing the implementation of a new ESS device in OpenEMS. When I have been testing my modbus implementation using the controller FixActivePower, the system setpoint…

---

## [Edge2Edge Master-Slave Issue](https://community.openems.io/t/edge2edge-master-slave-issue/10503)

<div class="topic-metadata">

**Author:** [@HamzaElyaakoubi](https://community.openems.io/u/HamzaElyaakoubi)\
**Replies:** 1\
**Last updated:** [September 23, 2025, 11:27am UTC](https://community.openems.io/t/edge2edge-master-slave-issue/10503 "2025-09-23T11:27:06Z")

</div>

Hello OpenEMS community, I’m currently working on controlling a slave Edge from a master Edge using Edge2Edge, and I’m facing some issues. The setup includes an ESS on the slave. On the master Edge, I activated the ESS…

---

## [Implementing a UI-Widget](https://community.openems.io/t/implementing-a-ui-widget/10497)

<div class="topic-metadata">

**Author:** [@pixelmanh](https://community.openems.io/u/pixelmanh)\
**Replies:** 0\
**Last updated:** [September 17, 2025, 7:37am UTC](https://community.openems.io/t/implementing-a-ui-widget/10497 "2025-09-17T07:37:54Z")

</div>

Hello OpenEMS community, As the title, how can I add widgets like voltage or current of meter device to UI interface? And tell me how it works when I select metertype.grid or production, can the UI show widgets like gr…

---

## [Contribute to OpenEMS, running as FEMS](https://community.openems.io/t/contribute-to-openems-running-as-fems/10495)

<div class="topic-metadata">

**Author:** [@Scritch](https://community.openems.io/u/Scritch)\
**Replies:** 0\
**Last updated:** [September 16, 2025, 9:34pm UTC](https://community.openems.io/t/contribute-to-openems-running-as-fems/10495 "2025-09-16T21:34:49Z")

</div>

Hello, I would like to analyze and correct two bugs within the Hardy Barth charging app which show up as when I try to charge my car via my FEMS system. I already have an OpenEMS system running on my local dev machine,…

---

## [Split up Metadata Interface for backend](https://community.openems.io/t/split-up-metadata-interface-for-backend/692)

<div class="topic-metadata">

**Author:** [@simonfey](https://community.openems.io/u/simonfey)\
**Replies:** 7\
**Last updated:** [September 15, 2025, 3:43pm UTC](https://community.openems.io/t/split-up-metadata-interface-for-backend/692 "2025-09-15T15:43:43Z")

</div>

Hi @stefan.feilmeier I wanted suggest an architectural change in your Metadata Backend interface io.openems.backend.common.metadata.Metadata Currently this interfaces combines Metadata for User and for Edge in a single…

---

## [Implementing a device](https://community.openems.io/t/implementing-a-device/10474)

<div class="topic-metadata">

**Author:** [@pixelmanh](https://community.openems.io/u/pixelmanh)\
**Replies:** 6\
**Last updated:** [September 11, 2025, 4:30pm UTC](https://community.openems.io/t/implementing-a-device/10474 "2025-09-11T16:30:29Z")

</div>

Hi OpenEMS community, I am having problems trying to create a protocol connection to my device. This is my folder when created according to the template after creating and running openems edge, i turn on the modbus/…

---

## [OpenEMS edge communication with endpoint hardware](https://community.openems.io/t/openems-edge-communication-with-endpoint-hardware/10476)

<div class="topic-metadata">

**Author:** [@DEEPAK](https://community.openems.io/u/DEEPAK)\
**Replies:** 5\
**Last updated:** [September 10, 2025, 8:06pm UTC](https://community.openems.io/t/openems-edge-communication-with-endpoint-hardware/10476 "2025-09-10T20:06:47Z")

</div>

I am currently using OpenEMS Edge on a system BMS. To establish communication with the endpoint, specifically a slave BMS, I would like to know the exact protocol that needs to be used for interfacing with the device. Co…

---

## [SolarEdge export limit ](https://community.openems.io/t/solaredge-export-limit/10461)

<div class="topic-metadata">

**Author:** [@A.Elhadioui](https://community.openems.io/u/A.Elhadioui)\
**Replies:** 1\
**Last updated:** [September 8, 2025, 7:54pm UTC](https://community.openems.io/t/solaredge-export-limit/10461 "2025-09-08T19:54:24Z")

</div>

Hi OpenEMS community, I want to work with SolarEdge SE25K and SE30K inverters, and I’d like to know if anyone has previously tested the SolarEdge implementation with these specific models using the pvinverter/selltogrid…

[Previous page](https://community.openems.io/c/english/8.md?page=1)

[Next page](https://community.openems.io/c/english/8.md?page=3)
