# Huawei deye integration

**URL:** <https://community.openems.io/t/huawei-deye-integration/10998>\
**Category:** Uncategorized\
**Created:** [September 30, 2026, 6:23am UTC](https://community.openems.io/t/huawei-deye-integration/10998 "2026-09-30T06:23:27Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![connekt-smarthome](https://community.openems.io/user_avatar/community.openems.io/connekt-smarthome/32/2706_2.png) [@connekt-smarthome](https://community.openems.io/u/connekt-smarthome)\
**Post date:** [September 30, 2026, 6:23am UTC](https://community.openems.io/t/huawei-deye-integration/10998/1 "2026-09-30T06:23:28Z")

</div>

Hello. Is it possible to integrate a Deye PV system with a Huawei PV system with openems?

---

<div class="post-metadata">

**Author:** ![sjjh](https://community.openems.io/user_avatar/community.openems.io/sjjh/32/2296_2.png) [@sjjh](https://community.openems.io/u/sjjh)\
**Post date:** [September 30, 2026, 7:22pm UTC](https://community.openems.io/t/huawei-deye-integration/10998/2 "2026-09-30T19:22:11Z")

</div>

It probably depends on the specific device. See below for the list of already supported devices:

> **[Huawei :: Open Energy Management System](https://openems.github.io/openems.io/openems/latest/edge/device_service.d/io.openems.edge.huawei.html)**

---

<div class="post-metadata">

**Author:** ![connekt-smarthome](https://community.openems.io/user_avatar/community.openems.io/connekt-smarthome/32/2706_2.png) [@connekt-smarthome](https://community.openems.io/u/connekt-smarthome)\
**Post date:** [September 30, 2026, 8:39pm UTC](https://community.openems.io/t/huawei-deye-integration/10998/3 "2026-09-30T20:39:03Z")

</div>

I have a setup with 3 Huawei (one master sun2000-30ktl-m1 and 2 slaves Huawei 2000-10ktl-m1) plus a Deye SUN-30K-SG02HP3-EU-AM3 (with 62kwh Deye HV batteries attached).

My question is:

- can I get data from Huawei master? Or should I use a Huawei logger?
- Is openems able to monitor and control these 2 systems And to define who should Produce and when? Who should inject surplus power to the grid and when?

---

<div class="post-metadata">

**Author:** ![sjjh](https://community.openems.io/user_avatar/community.openems.io/sjjh/32/2296_2.png) [@sjjh](https://community.openems.io/u/sjjh)\
**Post date:** [September 30, 2026, 9:05pm UTC](https://community.openems.io/t/huawei-deye-integration/10998/4 "2026-09-30T21:05:08Z")

</div>

I don’t have any experience with these, thus can only give a very generic answer:

- if your device is listed as supported, I assume all data needed to use it can be communicated between OpenEMS and the device. Save way to test is obviously to set up a test instance and check yourself. 🙂
- Controlling the devices as you explained is handled by OpenEMS with so called controllers (and schedulers). I suggest to read up on the core terminology in the docs (same website as linked above, see direct link below) and have a look at the existing controllers, if one fulfills your needs.

> **[Core concepts & terminology :: Open Energy Management System](https://openems.github.io/openems.io/openems/latest/coreconcepts.html)**

Maybe someone here has more experience with your exact set-up.