# SolarEdge export limit 

**URL:** <https://community.openems.io/t/solaredge-export-limit/10461>\
**Category:** Software-Development\
**Created:** [September 1, 2025, 2:26pm UTC](https://community.openems.io/t/solaredge-export-limit/10461 "2025-09-01T14:26:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![A.Elhadioui](https://community.openems.io/letter_avatar_proxy/v4/letter/a/22d042/32.png) [@A.Elhadioui](https://community.openems.io/u/A.Elhadioui)\
**Post date:** [September 1, 2025, 2:26pm UTC](https://community.openems.io/t/solaredge-export-limit/10461/1 "2025-09-01T14:26:56Z")

</div>

Hi OpenEMS community,

I want to work with SolarEdge SE25K and SE30K inverters, and I’d like to know if anyone has previously tested the [SolarEdge implementation](https://github.com/OpenEMS/openems/tree/develop/io.openems.edge.solaredge/src/io/openems/edge/solaredge/pvinverter) with these specific models using the [pvinverter/selltogridlimit controller](https://github.com/OpenEMS/openems/tree/develop/io.openems.edge.controller.pvinverter.selltogridlimit/src/io/openems/edge/controller/pvinverter/selltogridlimit) to limit exporting power?  
Regards.

---

<div class="post-metadata">

**Author:** ![chpo](https://community.openems.io/letter_avatar_proxy/v4/letter/c/cdc98d/32.png) [@chpo](https://community.openems.io/u/chpo)\
**Post date:** [September 8, 2025, 7:54pm UTC](https://community.openems.io/t/solaredge-export-limit/10461/2 "2025-09-08T19:54:24Z")

</div>

Hi … I have a SolarEdge SE9K. The existing pvInverter component in OpenEMS worked, but was read-only as the SE9K seems to use non-standard modbus addresses for writing (eg. setting a limit). I have written an own component for my inverter, you can find it at [GitHub - chpoulter/openems-addons: Christian's OpenEMS Addons](https://github.com/chpoulter/openems-addons) on github. I use it with selltogridlimit, which works fine.